Experiment 6: Optical Disk – Reflection and Refraction
January 25, 2016
As I learned during my high school physics, light, as it travels through a medium, is either reflected or refracted. This is because the speed of light varies for each medium. The most common
\[\begin{equation}
c = 3 x 10^8 m/s\label{a}\tag{1}
\end{equation}\]
is the speed of light in vacuum. For other medium, the speed of light is related by the refractive index n given by
\[\begin{equation}
n = \frac cv\label{b}\tag{2}
\end{equation}\]
where v is the speed of light on that medium. This will determine if the light will either be reflected or refracted, as shown in Figure 1.
The law of reflection was observed on all kind mirrors. That is, referring from Figure 1, the angle of the incident ray (θ1) is equal to the angle of the reflected ray (θ1'). This was because the incident ray is striking normal to the surface of the mirror, even if it is not plane, as long as the mirror stays on the center of 90°-90° axis of the optical disk. Any offset on its placement will not result to the law of reflection.
I therefore conclude, that every mirror exhibit reflection. Furthermore, as light passes through a medium, it travels slower than the speed of light in vacuum, producing refractive index greater than 1.
* Figures 3 to 9, All images taken by Karlo de Leon, January 25, 2016.
\[\begin{equation}
c = 3 x 10^8 m/s\label{a}\tag{1}
\end{equation}\]
is the speed of light in vacuum. For other medium, the speed of light is related by the refractive index n given by
\[\begin{equation}
n = \frac cv\label{b}\tag{2}
\end{equation}\]
where v is the speed of light on that medium. This will determine if the light will either be reflected or refracted, as shown in Figure 1.
Figure 1. An incident light strikes a surface with two different media.
< Image from: Lab Manual Authors, Physics 73.1 Laboratory Manual, 2013>
Figure 2. Diagram of the experiment.
Figure 2 shows a diagram of the experiment conducted. The different media are placed on the optical disk. These include mirrors (plane, convex, and concave), glasses (semicircular, triangular, trapezoidal) and lenses (double convex, double concave).
Figure 3. Reflection from a concave mirror at 0°.
Figure 4. Reflection from a plane mirror at 10°.
As for the semicircular glass, a reflected part and a refracted part is observed. The light as it strikes the center of semicircular glass (both on the plane part and on the curved part), reflects at the same angle the incident ray was striking. However a critical angle of 43.75° was observed, hence there was no reflected light observed when the incident ray strikes at 50°.
The refraction was taking place inside the glass. The point when the light passes from the glass to the air again exhibits no reflection and refraction. Hence, there is a total internal reflection.
The average index of refraction observed is equal to 1.48. Using Equation 2 to find the speed of light inside the glass is found to be equal to 2.03 E +08 m/s.
For the other glass shapes, the following refraction are observed:
Figure 5. Refraction in a double concave lens.
Figure 6. Refraction in a double convex lens.
Figure 7. Refraction in a triangular glass through the shorter side.
Figure 8. Refraction in a triangular glass through the longer side.
Figure 9. Refraction in a trapezoidal glass through the shorter base.
I therefore conclude, that every mirror exhibit reflection. Furthermore, as light passes through a medium, it travels slower than the speed of light in vacuum, producing refractive index greater than 1.
* Figures 3 to 9, All images taken by Karlo de Leon, January 25, 2016.
